Maintenance Lubricant. SAE 30 Aerosol MSDS
Mainlube Superior Maintenance Lubricants Pty Ltd
14 Underwood Ave, Botany NSW, 2017
Ph 02-9700-0880. ACN No. 001 748 876 Fax 02-9700-0881.
STATEMENT OF HAZARDOUS NATURE
Hazardous According to Criteria of Worksafe Australia
MATERIAL SAFETY DATA SHEET MAINLUBE 115
Page 1 of 3 November, 13
Page 1 of 3 November, 13
IDENTIFICATION
Product Name: Mainlube 115.
Chemical Name: Maintenance Lubricant. SAE 30
Other Names: Not Applicable. Manufacturer’s Product Code: 115/0A
UN Number: 1950
Dangerous Goods Class 2.1 Aerosol, Flammable N.O.S. Subsidiary Risk[s]: No Data.
Hazchem Code: 3(Y)E (Solvent).
EPG NO: 3A1 (Solvent).
Poisons Schedule Number: S5 (Solvent). Toxic and Hazardous
Ingredients: Solvent Carrier and expelling gas, contents under pressure.
Uses: Light Maintenance Lubricant. SAE 30, for lubricating locks, hinges, slides, pivots, chains, etc.
PHYSICAL DESCRIPTION AND PROPERTIES
Colour: Transparent Amber.
Appearance: Oily Liquid.
Form: Liquid.
Boiling Point: 70°C (Solvent), >260°C Lubricant.
Melting Point: Not Applicable.
Vapour Pressure: @ 25°C, mm HG:1.
Specific Gravity: kg/L @ 15.0°C: 0 843
Volatiles: (Solvent),
Evaporation Rate: n-Bu Acetate=1: (Solvent)=14
Vapour Density: 1013KPa/Air=1
Odour: Almost Odourless.
Solubility in Water: Nil @ 25°C
FLASH POINT
Solvent: 52°C
Lubricant residue: >260°C
Flammability Limits: Mixture, No Data Auto ignition:
Temperature: (Solvent), 260°C
Page 2 of 3 November, 13
Page 2 of 3 November, 13
OTHER PROPERTIES
Hazardous Polymerisation: Does not occur.
INGREDIENTS
Chemical Name | CAS Number | Proportion |
Mineral Oil | 804-247-5 | <75% |
Proprietary Additives | None Assigned | >5% |
Non Hazardous Mixture | ||
Hexane Carrier Solvent | 64742-49-0 | >20% |
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: Expected to be slightly toxic. May cause gastric irritation.
Skin: May cause irritation. Prolonged or repeated contact may cause irritation.
Eyes: May cause irritation.
Inhaled: Inhalation of vapour may cause drowsiness or narcosis and cause irritation to the nose and throat.
Chronic:
LC 50: No Data
LD 50: No Data
FIRST AID:
Swallowed: Do not induce vomiting. Aspiration of the fluid may cause lung injury (pneumonitis). Call a doctor immediately..
Skin: Wash thoroughly with soap and water.
Eyes: Flush with water for 15 minutes, hold eyelids open.
Inhaled: If respiratory irritation occurs move person to fresh air. If irritation continues call a Doctor.
ADVICE TO DOCTOR:
Refer First Aid above.
PRECAUTIONS FOR USE
Exposure Standards: TLV for mineral oil mists is 5 gm/m3, (Solvent) 50ppm Engineering Controls: Not generally required.
Personal Protection: Not generally required. Avoid prolonged or frequently
repeated contact. Wash skin thoroughly with soap and water after contact. Preferred to use safety glasses and neoprene or nitrile rubber gloves for frequent contact.
Flammability: Flammable, avoid or naked flames and ignition sources.
Page 3 of 3 November, 13
Page 3 of 3 November, 13
SAFE HANDLING INFORMATION
Storage and Transport: Store away from strong oxidising agents.
Refer Dangerous Goods Class 2.1.
Storage Temperature: Cool Place
UN Class: 2.1 Aerosols, 30, Flammable N.O.S
Packaging Group: III
UN Number: 1950
EPG Number: 3A1 (Solvent)
Correct Shipping Name: Aerosol, General Purpose Lubricant
Spills and Disposals: Absorbents such as cat litter, clays and rags to clean up
spills. Dispose of absorbent in approved disposal containers.
Note: Product may be slippery.
Remove all ignition sources. Contain spilled liquid with sand and earth.
Dispose of as per local regulation - do not store or mix with strong oxidants.
Fire/Explosion Hazard: Contents under pressure. Flammable substance. Do not
store or handle near heat, naked flame or sparks. Evacuate area. Use foam, BCF, carbon dioxide or dry chemical extinguishers if product ignites.
Decomposition Products: Hazardous Polymerisation not expected. Hazchem Code: No Data
Extinguishant: Use foam, BCF, carbon dioxide or dry chemical extinguishers if product ignites.
DANGER OF VIOLENT REACTION OR EXPLOSION:
Yes Contents under pressure
Protective Clothing; Full body suit plus breathing equipment.
Appropriate Measures; No Data
Evacuate; Yes, Evacuate Immediate Area, risk of can rupture and propellant Ignition
OTHER INFORMATION:
TLV for mineral oil mists is 5mg/m3
CONTACT POINT:
Mr Steve Simmonds
Mainlube Superior Maintenance Lubricants Pty Ltd. 14 Underwood Ave, Botany. NSW, 2019, Australia Ph 02-9700-0880. Fax 02-9700-0881.
Mob 0412-644-244.
24 Hour Emergency Tel No. Above Mobile Phones
Emergency Services Dial 000
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.