Rust Converter and Steel Preparer MSDS
Mainlube Superior Maintenance Lubricants Pty Ltd
14 Underwood Ave, Botany NSW, 2017
Ph 02-9700-0880. ACN No. 001 748 876 Fax 02-9700-0881.
STATEMENT OF HAZARDOUS NATURE
Hazardous According to Criteria of Worksafe Australia
MATERIAL SAFETY DATA SHEET MAINLUBE 515
MATERIAL SAFETY DATA SHEET MAINLUBE 515
Page 1 of 3 Nov-13
Page 1 of 3 Nov-13
IDENTIFICATION
Product Name; Mainlube 515 Rust Converter and Steel Preparer.
Chemical Name: Rust Converter.
Other Names: No Data Manufacturer’s Product Code: 515.
UN Number: 1805.
Dangerous Goods Class 8. Subsidiary Risk[s]:
Hazchem Code: 2R.
EPG NO: 8A1.
Poisons Schedule Number: S5.
Uses: For converting Rust to a stable compound preventing further rust.
PHYSICAL DESCRIPTION AND PROPERTIES
Colour: Clear Mobile Liquid.
Appearance Colourless, Odourless Mobile Liquid.
Form: Liquid
Boiling Point: 100ºC Water.
Melting Point: 0°C Water.
Vapour Pressure: 17 Hg (1 Atm) @ 20ºC Water.
Specific Gravity: (Water = 1) @ room temperature, approx 1.33-1.8.
Solids: None.
Evaporation Rate: As Water.
Vapour Density: No Data.
Odour: No Odour
Solubility in Water: (by weight %) 100% @ 25°C.
FLASH POINT
Solvent: Non Flammable.
Flammability Limits : Non Flammable. Auto ignition
Temperature: No Data.
OTHER PROPERTIES
Page 2 of 3 Nov-13
Page 2 of 3 Nov-13
INGREDIENTS
Chemical Name CAS Number Proportion
Phosphoric Acid 7664-38-2 <60% Proprietary Surfactants and solvents Non Hazardous >40%
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: Can be Toxic by Ingestion, burns to the mouth and throat, pain in the stomach, difficulty in breathing, nausea, if symptoms occur seek Medical assistance.
Skin: Concentrated solutions can cause burns if not immediately rinsed off. Temporary Irritant to Skin.
Eyes: Mists may be temporary Irritant to eyes, splashes in eyes can cause burns and if unattended permanent damage
Inhaled: Vapour or mist may cause irritation to throat or nose.
Chronic:
LC 50: No Data
LD 50: 1,530 mg/kg Rat Oral
FIRST AID:
Swallowed: Rinse mouth thoroughly with water thoroughly. Give water to drink. Do not induce vomiting, get medical attention.
Skin: Avoid direct contact, use impervious gloves. Immediately flush any contaminated skin areas with running water, under water remove all contaminated clothing shoes etc, wash all affected clothing before reuse. If symptoms appear obtain medical attention.
Eyes: Immediately irrigate with copious quantity of water for at least 30 minutes. Eyelids to be held open. Obtain medical attention.
Inhaled: Remove victim from exposure, Allow patient to assume most comfortable position and keep warm. Seek medical attention.
ADVICE TO PHYSICIANS:
Treat symptomatically based on judgement of doctor and individual reactions of patient.
PRECAUTIONS FOR USE:
Exposure Standards: TLV-TWA 1 mg/M3 STEL 3 mg/M3
Engineering Controls: If applying by compressed air spray gun,
maintain concentration below recommended exposure limit for air born particulate matter.
Personal Protection: Overalls or similar protective apparel. Safety glasses,
goggles or face shield as appropriate
Flammability: The product is considered non-combustible.
SAFE HANDLING INFORMATION
Storage and Transport: Store in well ventilated area. Store in a cool, dry
place. Keep from freezing, material may crystallise below - 20°C Keep container well sealed.
Storage Temperature: -15-80°C
Page 3 of 3 Nov-13
Page 3 of 3 Nov-13
SAFE HANDLING INFORMATION CONTINUED
Packaging Group: III
UN Number: 1805
EPG Number: 8A1
Correct Shipping Name: Phosphoric Acid Rust Killer.
Spills and Disposals: Keep spectators away, Do not touch spilled material,
Stop leak, prevent from entering sewers and waterways, neutralise with lime, Contain spill immediately, use sand, sawdust, etc. Transfer liquid and dyking material to containers for disposal.
Fire/Explosion Hazard: This material is considered stable and will
not burn, use water spray to cool containers and control vapour
Decomposition Products: None
Hazchem Code: 2R
Extinguishant: In case of fire, use extinguisher appropriate for burning material.
DANGER OF VIOLENT REACTION OR EXPLOSION:
No
Protective Clothing; Fire fighters should wear full protective clothing
including self contained breathing apparatus.
Appropriate Measures; No Data.
Evacuate; No Data.
OTHER INFORMATION:
Known materials that are incompatible with this product include, Bases, Sulphides, Phosphides, Cyanides, Acetylides, Fluorides, Silicides, and Carbides, Strong Oxidising and Reducing Agents..
ENVIRONMENTAL COMMENTS:
Mobility This material is water soluble. It may contaminate water, soils or sediments.
Degradability This product is expected to biodegrade. Accumulation This product is not expected to bioaccumulate
CONTACT POINT:
Mr Steve Simmonds
Mainlube Superior Maintenance Lubricants Pty Ltd. 14 Underwood Ave, Botany. NSW, 2019, Australia Ph 02-9700-0880. Fax 02-9700-0881.
Mob 0412-644-244.
24 Hour Emergency Tel No. Above Mobile Phones Emergency Services Dial 000
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.