Orlando Logo

Skin Guard Aerosol MSDS

Mainlube Superior Maintenance Lubricants Pty Ltd

14 Underwood Ave, Botany NSW, 2019

Ph 02-9700-0880. ACN No. 001 748 876 Fax 02-9700-0881.


STATEMENT OF HAZARDOUS NATURE

Hazardous According to Criteria of Worksafe Australia

MATERIAL SAFETY DATA SHEET MAINLUBE 415

MATERIAL SAFETY DATA SHEET MAINLUBE 415

Page 1 of 3

November, 13

Page 1 of 3

November, 13

IDENTIFICATION

Product Name: Mainlube 415

Chemical Name: Skin Guard.

Other Names: None

Manufacturer’s Product Code: 415

UN Number: 1950

Dangerous Goods Class: 2.1 1950 Aerosol 30, Flammable N.O.S. Subsidiary Risk[s]: None Assigned

Hazchem Code: None Assigned

EPG NO: None Assigned

Poisons Schedule Number: None Assigned Toxic and Hazardous

Ingredients: LPG Propellant

Uses: As a spray-on Skin conditioner

PHYSICAL DESCRIPTION AND PROPERTIES

Colour: White

Appearance: Aerosol Can

Form: White Hard Foam

Boiling Point: 100°C as per water

Melting Point: No Data

Vapour Pressure: Water

Specific Gravity: 0.97

Volatiles: No Data

Evaporation Rate: Water

Vapour Density: No Data

Odour: Perfumed Floral

Solubility in Water: 100% @ 15°C

FLASH POINT

Solvent: None, Water

Flammability Limits: None, Water Auto Ignition Temperature: None, Water LPG Propellant -74°C


OTHER PROPERTIES


415MSDS

image

Page 2 of 3 November,

13

Page 2 of 3 November,

13

Chemical Name

CAS Number

Proportion

Proprietry Formulation Skin

Non Harzardous

<20%

Care Product

LPG Propellant

>10%

Water

<70%

Chemical Name

CAS Number

Proportion

Proprietry Formulation Skin

Non Harzardous

<20%

Care Product

LPG Propellant

>10%

Water

<70%

INGREDIENTS


HEALTH HAZARD INFORMATION

HEALTH EFFECTS:

Acute:

Swallowed: If swallowed and person is conscious give water or milk. Igestion or subsequent vomiting may result in it’s aspiration. Product has low Toxicity.

Skin: Product conditions skin protecting and healing, No difficulty has been experienced or is expected..

Eyes: May cause moderate eye irritation.

Inhaled: No Data, Product is extruded as a hard foam, inhalation would be very difficult or impossible. Propellant Gas tends to be locked into the foam skin care product.

Chronic:

LC 50: No Data

LD 50: No Data

FIRST AID:

Swallowed: Do not induce vomiting. Aspiration of the fluid may cause lung injury Product has low toxicity, give milk or water to drink, call a Doctor If patients condition warrants.

Skin: Usually none required, in rare cases there could be some sensitivity could be experienced, discontinue use and check if sensitivity disappears.

Eyes: Flush with fresh water for 15 minutes, at least with eyelids open. Inhaled: If respiratory irritation occurs move person to fresh air.

If irritation continues call a Doctor.

ADVICE TO DOCTOR: Refer First Aid above

PRECAUTIONS FOR USE

Engineering Controls: Not generally required.

Personal Protection: Not generally required.

Flammability: Propellant LPG, Flash point Product Nil Water based product


415MSDS



image

Page 3 of 3 November,

13

Page 3 of 3 November,

13

SAFE HANDLING INFORMATION

Storage and Transport: Contents under pressure. Do not puncture or

incinerate container. Keep out of reach of children. Use adequate ventilation.

Storage Temperature: Store in a cool dry place away from heat and

open flame. Do not store in direct sunlight or where temperature is above 50° C (120° F).

UN Class: 2.1.

Packaging Group: 111.

UN Number: 1950.

EPG Number: 3A1.

Correct Shipping Name: 1950 Aerosol 30, flammable N.O.S.

Spills and Disposals: Dispose of in accordance with all applicable federal,

state and local regulations.

Fire/Explosion Hazard: Stable under normal conditions, Avoid excessive heat. Decomposition Products: Hazardous Polymerisation has not been reported

Incomplete burning generates carbon monoxide and carbon dioxide and smoke.. Product is not an oxygen donor.

Hazchem Code: 3(Y)

Extinguishing Media: Dry chemical, CO2, Alcohol or polymer foam extinguishers.

DANGER OF VIOLENT REACTION OR EXPLOSION:

Yes Contents under pressure

Protective Clothing; Fire fighters should wear full protective clothing

including self contained breathing apparatus.

Appropriate Measures; Stable under normal conditions, Avoid excessive heat. Evacuate; Stable under normal conditions, Avoid excessive heat.

ENVIRONMENTAL COMMENTS:

Mobility This material is water soluble. It may enter soil and contaminate water. It is not expected to adsorb on to soils or sediments.

Degradability This product is expected to readily Biodegrade. BOD, 73% 28 Days. Accumulation This product is not expect to bioaccumulate

CONTACT POINT:

Mr Steve Simmonds

Mainlube Superior Maintenance Lubricants Pty Ltd. 14 Underwood Ave, Botany. NSW, 2019, Australia Ph 02-9700-0880. Fax 02-9700-0881.

Mob 0412-644-244.

24 Hour Emergency Tel No. Above Mobile Phones Emergency Services Dial 000


We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.


415MSDS

Categories