Orlando Logo

Battery Terminal and Metal Protector Aerosol MSDS

Mainlube Superior Maintenance Lubricants Pty Ltd

14 Underwood Ave, Botany NSW, 2019

Ph 02-9700-0880. ACN No. 001 748 876 Fax 02-9700-0881.



STATEMENT OF HAZARDOUS NATURE

Hazardous According to Criteria of Worksafe Australia

MATERIAL SAFETY DATA SHEET MAINLUBE 410

MATERIAL SAFETY DATA SHEET MAINLUBE 410

Page 1 of 3 November, 13

Page 1 of 3 November, 13

IDENTIFICATION

Product Name: Mainlube 410

Chemical Name: Battery Terminal and Metal Protector.

Other Names: None

Manufacturer’s Product Code: 410

UN Number: 1950

Dangerous Goods Class: 2.1 Aerosol, 30, Flammable N.O.S. Subsidiary Risk[s]: None Assigned

Hazchem Code: None Assigned

EPG NO: None Assigned

Poisons Schedule Number: None Assigned Toxic and Hazardous

Ingredients: Propane Propellant

Uses: As a spray-on Battery Terminal and Metal Protector.

PHYSICAL DESCRIPTION AND PROPERTIES

Colour: Brown

Appearance: Aerosol Can

Form: Brown Hard Wax

Boiling Point: 50°C, Solvent

Melting Point: No Data

Vapour Pressure: No Data

Specific Gravity: 0.9

Volatiles: No Data

Evaporation Rate: Solvent fast at ambient

Vapour Density: No Data

Odour: Solvent Smell

Solubility in Water: Nil % @ 15°C

FLASH POINT

Product: Non Hazardous

Hexane Solvent: -18°C

LPG Propellant -74°C

Flammability Limits: Hexane Solvent 50ppm Auto Ignition Temperature: Hexane Solvent 260°C Auto Ignition Temperature: LPG Propellant 450°C

Page 2 of 3 November, 13

Page 2 of 3 November, 13

Chemical Name

CAS Number

Proportion

Proprietary Formulation Metal

Non Hazardous

<60%

Protection Product

LPG Propellant

68476-85-7

>10%

Solvent Hexane

100-54-3

<30%

Chemical Name

CAS Number

Proportion

Proprietary Formulation Metal

Non Hazardous

<60%

Protection Product

LPG Propellant

68476-85-7

>10%

Solvent Hexane

100-54-3

<30%

INGREDIENTS


HEALTH HAZARD INFORMATION

HEALTH EFFECTS:

Acute:

Swallowed: Expected to be slightly toxic. May cause gastric irritation.

Skin: Temporary Skin Irritant. Prolonged or repeated contact may cause Dermatitis.

Eyes: Eye irritant, unlikely to cause permanent tissue damage

Inhaled: Inhalation of vapours may cause drowsiness or narcosis and cause irritation to the nose and throat.

Chronic:

LC 50: No Data

LD 50: No Data

FIRST AID:

Swallowed: If swallowed and person is conscious give water or milk. Ingestion or inducing vomiting. may result in the fluid aspiration and may cause lung injury (pneumonitis). Call a Doctor.

Skin: Wash thoroughly with soap and water.

Eyes: Flush with water for 15 minutes, at least with eyelids open. If irritation continues call a Doctor.

Inhaled: If respiratory irritation occurs move person to fresh air. If irritation continues call a Doctor.

ADVICE TO DOCTOR: Refer First Aid above.

PRECAUTIONS FOR USE

Exposure Standards: TLV for mineral oil mists is 5mg/m³ over 8 hours.

Engineering Controls: Mechanical exhaust with spark arrested motor

is recommended if misting occurs.

Personal Protection: Not generally required. Avoid prolonged or frequently

repeated contact. Wash skin thoroughly with soap and water after contact. Preferred to use safety glasses and neoprene or nitrile rubber gloves for frequent contact.

Flammability: Flammable, avoid or naked flames and ignition sources.

Page 3 of 3 November, 13

Page 3 of 3 November, 13

SAFE HANDLING INFORMATION

Storage and Transport: Contents under pressure. Do not puncture or

incinerate container. Keep out of reach of children. Use adequate ventilation.

Storage Temperature: Store in a cool dry place away from heat and

open flame. Do not store in direct sunlight or where temperature is above 50° C (120° F).

UN Class: 2.1.

Packaging Group: 111.

UN Number: 1950.

EPG Number: 3A1.

Correct Shipping Name: 1950 Aerosols 30, flammable N.O.S.

Spills and Disposals: Dispose of in accordance with all applicable federal,

state and local regulations.

Fire/Explosion Hazard: Stable under normal conditions, Avoid excessive heat. Decomposition Products: Hazardous Polymerisation has not been reported

Incomplete burning generates carbon monoxide and

carbon dioxide and smoke. Product is not an oxygen donor.

Hazchem Code: 3(Y)

Extinguishing Media: Dry chemical, CO2, Alcohol or polymer foam extinguishers.

Danger Of Violent Reaction Or Explosion: Yes Contents Under Pressure

Protective Clothing; Fire fighters should wear full protective clothing

including self contained breathing apparatus. Appropriate Measures; Stable under normal conditions, Avoid excessive heat.

Evacuate; Yes, Evacuate Immediate Area, risk of can rupture and propellant Ignition

ENVIRONMENTAL COMMENTS:

Mobility This material is not water soluble. It is not expected to adsorb on to soils or sediments.

Degradability This product is slow to Biodegrade. It is considered Non Toxic. Accumulation This product is not expect to bioaccumulate

CONTACT POINT:

Mr Steve Simmonds

Mainlube Superior Maintenance Lubricants Pty Ltd. 14 Underwood Ave, Botany. NSW, 2019, Australia Ph 02-9700-0880. Fax 02-9700-0881.

Mob 0412-644-244.

24 Hour Emergency Tel No. Above Mobile Phones Emergency Services Dial 000


We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.

Categories