Seal Expander and Conditioner MSDS
Mainlube Superior Maintenance Lubricants Pty Ltd
14 Underwood Ave, Botany NSW, 2017
Ph 02-9700-0880. ACN No. 001 748 876 Fax 02-9700-0881.
STATEMENT OF HAZARDOUS NATURE
Non Hazardous According to Criteria of Worksafe Australia
MATERIAL SAFETY DATA SHEET MAINLUBE 260
MATERIAL SAFETY DATA SHEET MAINLUBE 260
Page 1 of 3 Nov-13
Page 1 of 3 Nov-13
IDENTIFICATION
Product Name: Mainlube 260.
Chemical Name: Seal Expander and Conditioner.
Other Names: None Assigned. Manufacturer’s Product Code: 260.
UN Number: None Assigned.
Dangerous Goods Class None Assigned.
Subsidiary Risk[s]: None Assigned.
Hazchem Code: None Assigned.
EPG NO: None Assigned.
Poisons Schedule Number: None Assigned. Toxic and Hazardous
Ingredients: Sulfur dioxide.
Uses: Repairs and prevent rubber oil seal leakage in lubrication systems.
PHYSICAL DESCRIPTION AND PROPERTIES.
Colour: Red.
Appearance: Light red clear liquid.
Form: Liquid.
Boiling Point: >200ºC.
Melting Point: Not Applicable.
Vapour Pressure: Not Determined.
Specific Gravity: 0.88 at 15.6ºC
Volatiles: Unknown.
Evaporation Rate: Not Determined.
Vapour Density: Not Determined.
Odour: Sulphur Smell.
Solubility in Water: Insoluble
FLASH POINT
Solvent: Nil.
Lubricant residue: 230ºC
Flammability Limits: Unknown Auto ignition
Temperature: No Data.
260MSDS
Page 2 of 3 Nov-13
Page 2 of 3 Nov-13
INGREDIENTS
Chemical Name CAS Number Proportion
Highly refined Mineral oils 64742-65-0 83-87% ( Does not contain PCB’s )
Sulfur dioxide 7446-09-5; OSHA PEL 2 ppm
(TWA), OSHA STEL 5 ppm; ACGIH TLV 2 ppm
HEALTH HAZARD INFORMATION
HEALTH EFFECTS:
Acute:
Swallowed: The LD50 in rats is >5000 mg/Kg. Based on actual data. Skin: May cause skin irritation. Based on actual data.
Eyes: Not expected to cause eye irritation. Based on actual data.
Inhaled: Short-term exposures to sulfur dioxide above 50-100 ppm can be dangerous and above 400-500 ppm, immediately life threatening.
Chronic:
LC 50: No Data.
LD 50: In rabbits is >20000 mg/Kg. Based on actual data.
FIRST AID:
Swallowed: DO NOT INDUCE VOMITING If conscious, give 2 glasses of water. Get immediately medical attention.
Skin: Wash with soap and water. Remove contaminated clothing. Get medical attention if irritation develops. Launder contaminated clothing before reuse.
Eyes: Flush with water at least 15 minutes. Get medical attention if eye irritation develops or persists.
Inhaled: Remove exposed person to fresh air if adverse effects are observed.
FIRST AID FACILITIES:
ADVICE TO DOCTOR: Treat symptomatically.
PRECAUTIONS FOR USE
Exposure Standards: The ACGIH TLV for mineral oil mists is 5mg/m³ for a
daily 8 hours exposure.
The ACGIH TLV for Sulfur dioxide is 2 mg/m³ for a daily 8 hours exposure.
Engineering Controls: As for oil mists.
Personal Protection: Avoid prolonged or frequently repeated contact.
Wash skin thoroughly with soap and water after contact. Use safety glasses and neoprene or nitrile rubber gloves for frequent contact.
Flammability: Product is not classed flammable. Flash Point greater than 190°C
Product may support combustion. Do not store with strong oxidants.
260MSDS
Page 3 of 3 Nov-13
Page 3 of 3 Nov-13
SAFE HANDLING INFORMATION
Storage and Transport: Store away from foodstuffs.
Use dry, security rated storage as used for schedule 6 poison categories.
Transport as per dangerous goods regulations.
Storage Temperature: Material is normally stable at moderately elevated
temperatures and pressures.
UN Class: None Assigned.
Packaging Group: None Assigned.
UN Number: None Assigned.
EPG Number: None Assigned.
Correct Shipping Name: Seal Expander and Conditioner.
Spills and Disposals: Personal Protective Equipment must be worn, see
Special Protection Information Section for PPE recommendations. Ventilate area if spilled in confined space or other poorly ventilated areas. Prevent entry into sewers and waterways. Pick up free liquid for recycle and/or disposal. Residual liquid can be absorbed on inert material. Check under Transportation and Labelling (DOT/CERCLA) and Other Regulatory Information Section (SARA) for hazardous substances to determine
regulatory reporting requirements for spills.
Fire/Explosion Hazard: Toxic fumes, gases or vapours may evolve on burning or
exposure to heat.
Decomposition Products: Smoke, carbon monoxide, aldehydes and other products
of incomplete combustion. Under combustion conditions, oxides of Sulfur will be formed.
Hazchem Code: Not Applicable.
Extinguishant: CO2, dry chemical, alcohol foam. Water can be used to cool and protect exposed material.
DANGER OF VIOLENT REACTION OR EXPLOSION: No
Protective Clothing; Long sleeve shirt is recommended. Launder
contaminated clothing before reuse.
Appropriate Measures; Good Safe Handling Practice. Evacuate; Not Usually.
OTHER INFORMATION:
Special Precautions: Open container in a well ventilated area. Avoid breathing vapours. Keep containers closed when hot in use. Sulfur dioxide may build up in the vapour space or head space at temperatures above 100ºF (38ºC).Wash thoroughly after handling. Launder contaminated clothing before reuse. Empty container contains product residue which may exhibit hazards of product.
CONTACT POINT:
Mr Steve Simmonds
Mainlube Superior Maintenance Lubricants Pty Ltd. 14 Underwood Ave, Botany. NSW, 2019, Australia Ph 02-9700-0880. Fax 02-9700-0881.
Mob 0412-644-244.
24 Hour Emergency Tel No. Above Mobile Phones Emergency Services Dial 000
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
We believe the statement, technical information and recommendation contained herein are reliable, but they are given without warranty or guarantee of any kind, express or implied, and we assure no responsibility for any loss, damage, or expense, direct or consequential, arising out of their use.
260MSDS